For mac instal FanControl v1744/5/2024 ![]() ![]() Efficient CPUs often will not need a fan while idling. MINTEMP: The temperature (☌) at which to SHUT OFF the CPU fan. The above example corresponds to /sys/class/hwmon/hwmon0/device/temp1_input.įCFANS: The current fan speed, which can be read (like the temperature) in /sys/class/hwmon/hwmon0/device/fan1_input FCTEMPS: The temperature input device to read for CPU temperature. This allows monitoring and controlling multiple fans and temperatures. The second "field" is the actual value to set. Each configuration option first points to a PWM device which is written to which sets the fan speed. The rest of the configuration file is split into (at least) two values per configuration option. INTERVAL: how often the daemon should poll CPU temps and adjust fan speeds. ![]() You can also edit the config file like this one, but bear in mind that you have different hardware:ĭEVPATH=hwmon0=devices/platform/coretemp.0 hwmon2=devices/platform/w83627ehf.656įCTEMPS=hwmon0/device/pwm1=hwmon0/device/temp1_inputįCFANS= hwmon0/device/pwm1=hwmon0/device/fan1_input They will return to 0% if the temperature is 65 C or less.You could then edit your config file /etc/fancontrol or run pwmconfig ( sudo su -c /usr/sbin/pwmconfig). For example, in my curves, the fans will always spin at 100% speed if the temperature is 95 C. When the minimum or maximum temperature is reached for both of these cards, their corresponding speed will trigger. Next, you need to set a minimum speed and a maximum speed. Basically, you're telling the app, "I want my temperature to never exceed X, but it's okay if it never goes below Y." Both cards require you to set a minimum and a maximum temperature. First, let's focus on the Target and Linear cards since they're very similar to each other. ![]() I've already configured these cards to my personal preference. For case fans, you can use the hottest motherboard, CPU, or GPU sensor as it doesn't matter too much. ![]() Before you do anything, you need to select a temperature source.įor CPU fans, use one of your CPUrelated sensors (pick the one with the highest temperature to be safe). ![]()
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |